DJI Enterprise Zenmuse P1 Full-Frame Photogrammetry Camera with 1-Year Care Plan
The New Benchmark for Aerial Surveying
The DJI Zenmuse P1 is the flagship photogrammetry solution designed for the ultimate in reality capture and survey-level accuracy.
The Zenmuse P1 integrates a high-performance 45MP full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal. This next-generation payload is engineered to take surveying efficiency to a whole new level, covering up to 3 km² in a single flight with centimeter-level precision. Combined with the Matrice 300/350 RTK, it offers a turnkey solution that is up to 10 times more efficient than previous generation systems.
At a Glance:
-
45MP Full-Frame CMOS Sensor for superior image detail.
-
3 cm Horizontal / 5 cm Vertical Accuracy without ground control points (GCPs).
-
TimeSync 2.0 for microsecond-level synchronization across all modules.
-
Global Mechanical Shutter with speeds up to 1/2000s to eliminate distortion.
-
Smart Oblique Capture for high-efficiency 3D modeling.
-
Interchangeable DL Lenses (24/35/50mm) for mission flexibility.
-
IP4X Rating for reliable operation in industrial environments.
Core Performance & Specifications
The Zenmuse P1 is built for the rigors of professional fieldwork, featuring a robust 3-axis gimbal and a low-noise, high-sensitivity sensor that extends daily operational windows even in low-light conditions.
-
Weight: Approximately 800 g.
-
Ingress Protection: IP4X.
-
Operating Temperature: -20° to 50° C.
-
Photo Interval: Shortest continuous shooting at 0.7 s.
-
Max Efficiency: Covers 7.5 km² in a single workday (Smart Oblique).
Subsystem Deep-Dives
Control & Imaging Interface
The P1 is fully integrated into the DJI Enterprise ecosystem, utilizing the DJI Pilot 2 app for mission planning and real-time data verification. Pilots can check RTK status and data quality immediately post-flight to ensure mission success.
Precision Timing (TimeSync 2.0)
The all-new TimeSync 2.0 system aligns the camera, flight controller, RTK module, and gimbal at the microsecond level. This ensures that each image's metadata contains precise position and orientation data, allowing for centimeter-accurate mapping results without the need for traditional site ground controls.
Safety & Redundancy
System Reliability
The P1 features a Global Mechanical Shutter that prevents the 'rolling shutter' effect often found in other sensors. By freezing the frame at 1/2000 of a second, the system ensures that high-speed flight does not compromise data accuracy.
Ecosystem & Modular Expandability
Payload Configurations
The Zenmuse P1 is exclusively compatible with the Matrice 300 RTK and Matrice 350 RTK platforms. It occupies a single gimbal slot and is optimized for the primary gimbal position.
Premier Lens Options
The system supports the DJI DL-Mount, allowing users to swap between three industry-specific fixed-focus lenses:
-
24mm: Optimized for lower altitude flights.
-
35mm: The versatile standard for most mapping missions.
-
50mm: Designed for high-altitude operations to maintain high resolution.
Use Cases (Intelligent Operation)
-
2D Orthomosaic Mapping: Generates high-resolution maps that meet cadastral 1:500 accuracy standards.
-
3D Oblique Modeling: Uses Smart Oblique Capture to rotate the gimbal and capture essential angles, reducing post-processing time by up to 50%.
-
Detailed Reconstruction: Ideal for heritage site conservation, building inspections, and geological surveys.
Logistics & Fulfillment
"In the Box" List
-
1 x Zenmuse P1 Gimbal and Camera
-
1 x DJI DL 35mm F2.8 LS ASPH Lens
-
1 x SD Card (128GB)
-
1 x Storage Case
-
1 x Lens Cleaning Cloth
- 1 x DJI Care Enterprise Basic (1 Year)
Dronedesk Expert Tip: Dronedesk is the web-based drone operations management platform that makes planning safe drone flights super-simple and efficient. It saves you and your team hours of admin by automating air, ground, and weather intelligence gathering so you can focus on what's important: capturing high-accuracy data safely.
- IP Rating:
- IP4X
- Operating Temp:
- -20 to 50C