DJI Matrice 4D Standalone Combo (UK) - High-Precision Mapping & Inspection
£4,715.00
Professional Accuracy Redefined for Modern Geospatial Needs
Standard mapping and inspection tools often struggle with environmental limitations and signal interference in rugged terrain. The DJI Matrice 4D is engineered to bridge this gap, providing a water- and dust-resistant platform optimized for professional high-precision mapping and detailed surface inspections. By combining an advanced three-camera imaging system with state-of-the-art obstacle sensing, this platform ensures consistent data collection where traditional compact drones fall short.
Operational Resilience and High-Fidelity Results
The Matrice 4D significantly enhances project ROI by offering an impressive 54-minute forward flight time, a 37% increase over previous generations, reducing battery swap downtime and increasing site coverage per deployment. Its rugged IP55 rating allows for missions in harsh weather conditions, extending operational windows for time-sensitive infrastructure audits.
For remote and mountainous terrain, the Matrice 4D features an innovative Airborne Relay function, allowing one drone to act as a signal bridge. This setup maintains high-definition video transmission in obstructed areas without needing 4G signals, ensuring pilot safety and data quality in the most challenging topographies.
Key Features
-
Tri-Camera Imaging Excellence: Features a 4/3 CMOS 20MP wide camera with a mechanical shutter for distortion-free mapping, plus 70mm medium tele and 168mm tele cameras for detailed inspections.
-
Ultra-Stable Telephoto Capture: Foreground stabilization ensures clear imagery even at 10x zoom or higher, critical for reading substation instruments or detecting structural cracks from safe distances.
-
Advanced Obstacle Awareness: Combines rotating LiDAR and millimetre-wave radar for precise 12mm wire-level avoidance, enabling safe navigation through complex power line crossings.
-
Full-Colour Night Vision: Four high-resolution fisheye lenses and a dedicated Night Scene mode provide full-colour positioning and safety during low-light operations.
-
Precision Surveying Modes: Supports 5-direction oblique photography, 3-direction orthophotos, and real-time terrain following to meet diverse geospatial requirements.
-
Laser Accuracy: An integrated Laser Range Finder provides distance measurements up to 1800m, essential for pinpointing inspection targets.
-
Standalone Flexibility: While designed for DJI Dock 3, this combo pairs with the DJI RC Plus 2 Enterprise for immediate, standalone manual field deployment.
What’s in the Box?
-
1 x DJI Matrice 4D Aircraft
-
1 x DJI RC Plus 2 Enterprise Remote Controller
-
1 x DJI Matrice 4D Series Battery
-
3 x Propellers (Pair)
-
1 x 240W Power Adapter and Charging Hub
-
1 x Aircraft Carrying Case
-
1 x 1-Year DJI Care Enterprise Plus (Automatically Activated)
- Takeoff Weight (with propellers):
- 1850 g
- Max Takeoff Weight:
- 2090 g
- Dimensions (Folded):
- N/A
- Dimensions (Unfolded):
- 377.7×416.2×212.5 mm (L×W×H, without propellers)
- Max Payload:
- N/A
- Max Ascent Speed:
- 6 m/s (Normal Mode)/10 m/s (Sport mode)
- Max Descent Speed:
- 6 m/s (Normal Mode)/8 m/s (Sport mode)
- Max Horizontal Speed (at sea level, no wind):
- Normal Mode: 15 m/s flying forward, 12 m/s flying backward, 10 m/s flying sideways/Sport Mode: 21 m/s flying forward, 19 m/s flying backward, 15 m/s flying sideways
- Max Takeoff Altitude:
- 6500 m
- Max Flight Time (no wind):
- 54 minutes
- Max Hover Time (no wind):
- 47 minutes
- Max Flight Distance (no wind):
- 43 km
- Max Wind Speed Resistance:
- N/A
- Operating Temperature:
- -20° to 50° C (-4° to 122° F)
- Global Navigation Satellite System (GNSS):
- GPS + BeiDou + Galileo + QZSS + GLONASS (QZSS and GLONASS are supported only when the RTK module is enabled.)
- Propeller Model:
- 1364F foldable low-noise anti-ice propellers
- Ingress Protection Rating:
- IP55
